CS600X Electric Scooter
SPECIAL SALE and Free Shipping - Price Reduced
Our most comfortable scooters to ride. It has a nice wide seat that could support most of our customers. The ride is smooth and powerful with its 600 watt motor. This is one of our safest models because of its braking system. This model features steel wheels that are strong enough to carry heavy loads. This scooter also comes in Silver, Maroon and Blue.
|
|
Specifications:
Motor: 600w (Brushless)
Voltage: 48v
Batteries: (4) 12v / 20 amps
Length: 70”
Seat Height: 29”
Tire Size: 16” x 3”
Weight: 196 lbs
Passengers: 2
Front Brakes: Cable operated drum brake
Rear Brakes: Cable operated drum brake
Max Speed: 24 mph
Range: 23 Miles
Max Weight Limit: 460 lbs
Charge Time: 8-10 Hours
|
Features:
Battery charger (110V)
Speedometer / Odometer
Battery level indicator
Turn signals / Horn
Brake light / Tail light
Headlight w/high low beam
Side view mirrors
Steering key lock
Glove Box
Under seat storage
Removable rear storage pod
Luggage rack
Tool Kit
Kick stand & Service stand
Twist grip throttle
Rear passenger back rest
|
Electricity Cost Per Charge = 26 Cents
Electricity Cost Per Mile = 0.60 Cents (2/3 of a penny)
A common question is how much electricity does it take to charge the battery. At the bottom we have a charge rate graph. The chart shows how much power is being drawn from the 110VAC outlet during the charge cycle. Each dot represents 15 minutes of charge time. Charging occurs in two steps, these are known as bulk charge and float charge. The first step takes about 7.5 hours as you can see on the graph. This is where the majority of the charge occurs. At this point the charger steps down the power for the remaining 20% of the charge cycle.
Average power utilization can be calculated by adding all of the plot points together and dividing that number by the number of plot points. In this case we take 44 and divide it by our 40 plot points for an average power draw of 1.1 amps. Watts equal voltage times amperage so we multiply 110 X 1.1 to get 121 watts. Our charge time is 9.5 hours so we multiply the average power draw of 121 times 9.5 to get 1.149 kilowatt hours.
In California, PG&E’s baseline rate per kilowatt is $.12 (as of August 2008). Multiply this rate (.12) times the total watt hours used (1.149) to charge the battery and we find that it costs about .14 cents to fully charge an exhausted battery. A fully charged battery has range of 23 miles with this model so we can see that it costs just 0.60 cents per mile for electricity to operate this scooter.
|